PO Crates

PP/PE regrind, ratio approximately 70% PP - 30% PE
Sourced from: Crates containing soft fruit
Presence of a trace of filler. Intumescent material: good, but rather irregular flow.
FTIR, oven test - FIG: Indicates PP/PE, mainly PP
Density (g/cm3): 0.958
Moisture content (100°C): 0.12%
MFI (230°C, 2.16kg): 24.6 g/10min - quite irregular flow, quite rough extrudate, foaming!
DSC - Fig: 134°C: HDPE, 165°C: PP